Cedar, Jones Wholesale Lumber

Western Red Cedar Products | Cedar Grades | Stock Cedar Patterns

Western Red Cedar Products

Clear R-List (Export Grade) Rough Mill Rough, Full Sawn, S4S, Resawn, Custom Patterns
1x4, 1x6, 1x8, 1x10, 1x12*	KD	6’ to 20’
2x4, 2x6, 2x8, 2x10, 2x12	KD	6’ to 20’
4x4, 4x6, 4x8, 4x10, 4x12	GRN	8’ to 20’
6x6, 6x8, 6x10, 6x12	GRN	8’ to 20’
*Denotes material that must be ordered in pairs

"A" Clear, Vertical Grain (VG) Stock Pattern
1x6 T&G S1S RS1S VJ-2S #733R	KD	6’ to 16’

C & Better Clear S3S, Combed 1 Face
7/8x4, 7/8x6, 7/8x8, 7/8x10, 7/8x12	KD	6’ to 16’


Sound Tight Knot (STK) Rough Mill Rough, Full Sawn, S4S, Resawn, Custom Patterns
1x4, 1x6, 1x8, 1x10, 1x12*	KD	6’ to 20’
2x4, 2x6, 2x8, 2x10, 2x12, 2x14	KD	6’ to 20’
4x4, 4x6, 4x8, 4x10, 4x12, 4x14, 4x16, 4x18	GRN	8’ to 20’
4x12	GRN	24’
6x6, 6x8, 6x10, 6x12	GRN	6’ to 20’
6x12	GRN	24’
*Denotes material that must be ordered in pairs

S3S, Combed 1 Face
7/8x4, 7/8x6, 7/8x8, 7/8x10, 7/8x12	KD	6’ to 16’

Stock Pattern
1x6 T&G S1S RS1S VJ-2S #711R	KD	6’ to 20’

Textured Siding Western Red Cedar (WRC)

5/8

Knotty T1-11 Plain, 6-Patch

4x8

5/8

Clear T1-11 Plain, 6-Patch

4x8

***Custom grooving available on all textured sidings***

Custom Milling

Surfacing
Resawing
Corbels
Knee Braces
Baluster
Siding/ Custom Patterns

Click here to see our Material Safety Data Sheets

Cedar Grades

Kiln dried clear grades of Western Red Cedar trim boards grades as finish lumber. Typically available as S4S or SIS2E products.



		A Clear Permits somewhat more imperfections than Clear Heart but the grade is still restricted to pieces with excellent appearance. Typically sold with a percentage of B grade (NLGA 200c/WCLIB 102-d). Grading Rule Paragraph - NLGA 200b - WCLIB 102-c Unseasoned clear grades of Western Red Clear trim boards. Typically available as rough or SIS2E products.

		C and Better Clear High quality lumber for use where appearance is important. In addition to interior and exterior trim, lumber of this grade is used for cabinetry, doors, windows and similar applications. Grading Rule Paragraph - NLGA 202b, c - WCLIB 149-b, c - WWPA 10.11, 12

		Select Knotty Knots are sound and tight. Other characteristics are limited so they do not detract from the end use intended. Typically sold with a percentage of Quality Knotty grade (NLGA 204b/WCLIB 111-f). Grading Rule Paragraph - NLGA 204a - WCLIB 111-e

		#2 and Better Clear This grade should be specified when the finest quality rough lumber is desired. The lumber is sound and well manufactured. Its natural characteristics do not detract from the wood’s fine appearance. Grading Rule Paragraph - Export R List 401

		Appearance Knotty A non structural product manufactured to meet the appearance requirements of quality projects. This materials has highly restricted wane allowances to give well defined corners. Contains no holes or other characteristics. Represents good value for appearance end uses. Available rough sawn or rougher headed in nominal 2” and thicker sizes. Grading Rule Paragraph - Proprietary Note: Upon request, Appearance Knotty timbers are available with structural grading. Be certain to specify Appearance Knotty structural lumber when strength characteristics are required.

^ TOP

Stock Cedar Patterns

Pattern Stock- (STK/Select Knotty)

Tongue & Groove, Pattern #711R
1x6 T&G VJ S1S RS1S Reversible Pattern #711R

*** Custom Patterns Available ***

^ TOP